At home, in most cases, the machines used by small size. They are not much different from the analogues used in the production of quality manufactured products, but significantly lower on number of products manufactured per unit time. Technical review of machines used in the carpentry business, perhaps you should start by considering Multiblade machine. It is designed for cutting bars on board, at the quality of the sawn material is not inferior to a professional production lines. Machines of this type have a second name – minipiloramy, due to the fact that the process of sawing by means of stretched in a frame saw blades. Their number exceeds 40 units, and from this it follows that for sawing lumber obtained more than 40 boards.
The cost of the machine Multiblade slightly higher than the cost of similar functionality devices, but it will return the equipment to order less time. For processing, and more specifically for milling various kinds of wood surface on the inner and outer contour, used milling machines. They are divided into two groups: those with upper and lower position of the spindle. In the first case, these machines are used for hauling the quarters, and nests for the treatment of external roughness elements squared structures. In the second If machines are used for mass production woodworking industry. When working on the milling machine is required to strictly observe safety rules: Out of cutters to be harmless to exclude the possibility of injury. It is undesirable to produce milling "against the grain" wood surfaces. Most importantly, before starting work on the machine the workpiece to be sawdust c both ends.
Cutting bars and thick boards into thinner components used band saw indexing machines. In structure, they can be vertical and horizontal. Machine itself consists of a bed on which the wheel and motor. Around the table are the videos, which are regulated by stretch saw. The principle of operation of this equipment is extremely simple. In conclusion, I want to say: currently existing machines – it sophisticated electrical equipment. That's why we should not forget that before you start, especially with the new equipment, be sure to read the safety.